BMW - 2.0 - 163-BHP - 122-KW
Win tot 30% meer vermogen en 40% meer koppel
| paramteres | origineel | Stage 1 | Stage 2 |
|---|---|---|---|
| Het vermogen (Hp) | 163 | 200 | 220 |
| Koppel (Nm) | 350 | 420 | 462 |
Voertuig informatie
| Voertuig: cars |
| Merk: BMW |
| Jaar: (01/2004 - 01/2007) |
| Model: 120d Hatchback |
| Brandstof: Diesel |
| Motor: 2.0 - 163-BHP - 122-KW |
| Chituning: M47TU2D20 |
Ecu informatie
| Motor ecu: BOSCH EDC16C35 |
| : Sealed all around, remove one side |
| Leesbare apparaten: Kick panel, driver's side |
| OBD: ENU_094300CAN1 |
Leesbare apparaten
| KESSV2: OBD |
| Kess V2 Protocollo: 164 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 65 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: OBD Only |
| X17: OBD Only |
| CMD: OBD/Boot |
Beschikbare oplossingen
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: NO |
Opmering 1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write
